Textile Related Instruments

Product Details:

Bursting Strength Tester is a widely used measure of resistance to rupture in various materials. A test specimen is held between two circular clamps and subjected to an increasing pressure from a rubber diaphragm. The rubber diaphragm is expanded by a controlled hydraulic pressure until the test specimen ruptures. The bursting strength of the specimen is the pressure reading at the time of rupture.

Features:

Simple construction, open type, body mounted pressure gauges and panel mounted operating switches.

Two units of measurement (Kg/cm2 & PSI)

Single push button cycle.

Dual gauges for greater accuracy.

Lazy Hand (maximum pointer) for maximum burst reading.

Heavy duty industrial Bourd on pressure gauges for greater durability.

Switch from one gauge to another by opening and closing of SS valves.

DIMENSIONS:

Depth : 546 mm (21.5 in.)

Height : 698 mm (27.5 in.)

Width : 838 mm (33 in.)

 
WEIGHT:

Net weight : 82 kgs

Gross Weight : 135 kgs

 
CAPACITY:

Pressure Gauge 1: 0-7 Kg/Cm2

Pressure Gauge 1: 0-70 Kg/Cm2

 
ACCESSORIES:

C spanner, 3 spare diapgragms, 250 ml

topping up fluid, 1 no. calibration foil

supplied spare with the machine

 
STANDARD COMPLIANCE:

BS 3424/3137, ASTM D 3786/ASTM D 774, 2758/2559/3303/3669 standards

 
CONNECTIONS:

Electrical : 1 phase, 230 V AC, 50 Hz.

 
CONSUMABLES:

Rubber Diaphragm & Calibration Foil.

Additional Information:

• Item Code: IK-BST-01
• Delivery Time: 15 Days

Product Details:

Colour Matching Cabinets is designed to evaluate the colour matching of fabrics, yarns or any coloured materials. Color Matching Cabinet checks matching under a standard light source in a closed environment to minimize the interference of external lights. Ikon Industries, Mumbai, India have different models of color matching cabinets.

• Color Matching Cabinet is used to access the colour matching of Yarns & dyed or printed fabrics or any material anyway coloured.
• The control panel of colour matching cabinet is ergonomically designed for operator comforts.
• Colour matching cabinet consists of five standard light sources, CWF, D 65, TL 84, UVB and INCA
• Natural matt colour sunmica is used in side the cabinet that strictly adheres to the International standards.
• Supplied complete with 45° angle viewing table.
• Weight: 28 Kgs. (61 lbs)

 

Dimensions:

• Length Depth Height: 710 mm 470 mm 575 mm.

285 inch 18.5 inch 22.6 inch

• Related Standards: 3664,BS 950, DIN 6173, ASTM D 1729, and JIS Z 8723

Product Details:

It is one type of physical test of the fabric which is known as off line quality assurance system. By the following way we can measure the weight of the fabric. 

Cut the fabric with the GSM cutter (gram per square inch).

Weight the fabric with the electric balance.

The cut sample is 100 sq.cm. The weight of the cut sample is multiplied by 100.

The result is the GSM of that particular fabric.

After cutting the fabric we can calculate the weight of the fabric as follow. 

Suppose, 
The weight of the fabric is 2.51 gm. That means the GSM of the fabric is 251. Because when we cut the fabric with the GSM cutter then we get 1 from the 100 meter from the 1 square meters.

Product Details:

ICI Pilling and Snagging Tester, used to determine the surface pilling and snagging pro both woven and knitted materials. It complies in full with the requirements of EN ISO 129 BS 5811, etc.

Standards: GB/T4802.3, ISO 12945.1, BS5811, JIS L1076, IWS TM152

Feature of ICI pilling tester Simplified designing, more convenient to operate, and easy to maintain. Synchronous speed motor drives the test boxes, ensuring constant speed of rotation

Additional Information:

• Item Code: IK-PST-01
• Delivery Time: 4-5 weeks

Product Details:

Tester: We are famous for providing a premium quality collection of Martindale Abrasion Cum Pilling Tester to our clients. Moreover, customers can avail these testers at competitive prices.

Features:

• Easy to use
• Top performance
• Low maintenance
• Fine finish
• Longer service life
• High efficiency

• Abrasion cum pilling tester to determine pilling resistance & abrasion resistance of any type of fabrics.
• With three variable load 3Kpa, 9kpa, 12kpa to test in different standards.
• Ergonomically designed digital control panel with display for four individual stations.
• All control & components strictly adheres to C E Mark specifications for safety.
• Emergency stop switch to stop testing, in urgent, without hindering setting.
• Supplied with all accessories including two sample cutters 140mm & 38mm with spare blades & cutting materials to make sampleconveniently & one stainless steel pen to draw lissagious figure.
• Supplied with inspection & calibration certificates.
• Dimension:

 

• Related Standards: Bs 3424/5690,5470, ASTM 4966/4970-99,DIN 53863/53865, BSEN 388/530,IS 12673, and JIS L 1096 Standards.

Product Details:

We are an eminent name of high-quality GSM Cutting Blade. The offered blade is used for polishing and cutting of granite, basalt, limestone, dolomite, sandstone, marble and other stone. It is made in our technically sound manufacturing unit using premium quality raw material and advanced machinery by our professionals. We also test our provided blade on diverse parameters to ensure its high strength and perfection. We are offering this GSM blade in varied sizes according to the needs of our clients.

Features:

• Compact design
• Corrosion proof
• Easy installation
• Perfect finish

Product Details:

Electronic Crockmeter (Rubbing fastness Tester) to determine the Colour fastness of Textile to Dry or Wet Rubbing as per AATCC & Requirement.

Latest ergonomic design of electronic crockmeter with modern aesthetics and Electronic Control.

Easy to use, Polycarbonate Dual Specimen Clamps for Fabric as well as Garment Testing.

22N extra load to test Rug & Pile Fabrics in British Standard. 25mm Extra finger provided to test multi yarn bands

Fully automatically operated electronic crockmeter having LCD Display.

Complete with a host of accessories.

Supplied with Inspection and Calibration Certificate.

Weight: 28Kg. (61.6 lb.)

 
Dimension:

Length Depth Height: 725 mm 305 mm 305 mm.
28.5 inch 12 inch 12 inch

Related Standards: 105 X 12/D02, BS 1006 D02, AATCC 8/165, AATCC 8/165

Product Details:

• Digital fabric thickness tester to determine the thickness of the fabrics in millimeters.
• Maximum capacity 10mm & accuracy 0. 01mm.
• Digital gauge for measuring thickness in millimeter.
• Stainless steel anvil for long life the equipment.
• Standard loan on the pressure foot to ensure accuracy.
• Complete with all accessories including two different type of Pressure foot.
• Supplied with calibration & inspection certificates.
• Weight main unit Assy: 3.4 Kg. 7.5 lbs

 

 

Dimension main unit:

• Diameter	Height
  209.5 mm	152 mm.
  8.25 Inch	6 Inch

Product Details:

Stiffness Tester helps to determine the bending height, flexural rigidity and bending modulus of fabrics by simple procedures as per ASTM D 1388 and BS 3356/9073-7.

Additional Information:

• Delivery Time: 10 DAYS

Product Details:

Shrinkage scale is used to determine directly the % dimensional change (shrinkage) in all types of fabrics.

Fine calibrated Shrinkage Template with 10-inch &18-inch benchmarks options.

Fine cover is supplied to keep the scale safe.

Scale itself works as a template.

Too handy, it can be carried anywhere for instant spot-checking.

Two fine tipped black & yellow fabric markers are supplied for accurate marking on light & dark colour fabrics.

Calibrated scale to evaluate shrinkage up to 20% & stretch up to 10% directly.

Supplied with inspection & calibration certificate.

Weight: 60gms(0.132 Lbs)

Dimension:
22 inch 3 inch 0.04 inch

Related Standards: AATCC 135,150

Length Depth Height: 560 mm 76 mm 1.1 mm.

Shrinkage template with scale is used to determine directly the % dimensional change (shrinkage) in all types of fabrics.

Fine calibrated Shrinkage Template with three 14-inch benchmarks length-wise & three 14-inch benchmarks width-wise.

Calibrated scale to evaluate shrinkage & stretch directly Up to 15%.

Acrylic template & scale keeps its calibration intact in general atmospheric condition.

Supplied withal accessories- black & yellow marking pens.

Supplied with inspection & calibration certificate.

Weight: 1kg (2.2 lbs)

Dimension:

Length Depth Height

500 mm 500 mm 3 mm.
19.6 inch 19.6 inch 0.11 inch

Related Standards

3759 & BS 4931 Standards

Product Details:

Introduction:

The property of a fabric which enables it to recover from folding deformations is called as Wrinkle Recovery Tester. The IKON Wrinkle Recovery Tester is used for determining the appearance of textile fabrics after induced wrinkling. Wrinkle recovery tester is applicable to fabrics made from any fibre or combinations of fibre. However, until recently separate estimation of fineness and maturity were possible only through laborious procedures using conventional methods.

 

The use of the simple air-flow method was capable of providing only the micronaire value (Mc) which is influenced by both fineness and maturity. Considerable work has, therefore, been going on in various research laboratories to modify the air-flow method to make it capable of providing separate estimates of fineness and maturity. The fineness tester has been modified 5,6 to obtain independent estimates of fineness and maturity. A separate estimation of fineness would help in deciding the spinning limit of cotton and in getting an accurate prediction of yarn strength from fibre characteristics. The estimates of maturity would help in the detection and avoidance of immature cottons which are prone to neppiness and dyeing problems.

 

Principle

A test specimen is wrinkled under standard atmospheric conditions in a standard wrinkling device under a pre-determined load for a prescribed period of time. The specimen is reconditioned in the standard atmosphere for textile testing and evaluated for appearance by comparison with 3-dimensional reference standards.

 

Equipment

Wrinkle recovery tester consists of a Base with a Stand. At the base of the stand a fixed flange is fitted with a top flange which is moveable and attached with a locking pin. The instrument also comprises of three weights of 500, 1000 and 2000 g. The appearance of the specimen is compared against an optional photographic scale which can be procured separately and is not included with the above equipment.

 

Related Standards :

Standard Test Method for Water Repellency : Spray Test as per AATCC – 128-1999

Product Details:

Product Specification Product Description

An economical, equipment to the prepare beautiful , swatches , of the different sizes with maximum width .

Of the 400 mm swatch cutter is a portable to the convenient equipment for the zigzag cutting of the patterns , apparel , dress, curtains upholstery , house , hold textiles .

Additional Information

Product Details:

Product Specification

Additional Information:

• Delivery Time: 7 DAYS

Product Details:

• Fabric thickness tester used to determine flammability any type of fabric.
• Latest Portable & handy model, which can be easily, carried anywhere.
• Smooth precision-engineered components for accurate results.
• Maximum capacity 10mm & accuracy 0. 01mm.
• Analog dial for measuring thickness in millimeters.
• Supplied with two pressure feet for different type of fabrics.
• Dead weight is added on top of the instruments for better result.
• Supplied with calibration & inspection certificates.
• Weight: 1.9 Kg. (4.18 lbs)
• Dimension:
  

  Length	Depth	Height
  115 mm	185 mm	180 mm.
  4.5 Inch	7.5 Inch	7 Inch

Product Details:

It is one type of physical test of the fabric which is known as off line quality assurance system. By the following way we can measure the weight of the fabric. 

Cut the fabric with the GSM cutter (gram per square inch).

Weight the fabric with the electric balance.

The cut sample is 100 sq.cm. The weight of the cut sample is multiplied by 100.

The result is the GSM of that particular fabric.

After cutting the fabric we can calculate the weight of the fabric as follow. 

Suppose, 
The weight of the fabric is 2.51 gm. That means the GSM of the fabric is 251. Because when we cut the fabric with the GSM cutter then we get 1 from the 100 meter from the 1 square meters.

Product Details:

The ability of rubber products to withstand repeating flexing without developing cracks is of prime importance where such products are used in conditions undergoing repeating flexing. The flexing endurance of rubber products is determined by simulating in the laboratory the action of flexing repeatedly under standard conditions of speed, mode, and degree of flexing. One of the accepted procedure is the use of a De-Mattia Flexing Tester. This tester provides useful information about the resistance of compounds of vulcanized rubber to flex cracking when subjected to flexing. Cracks develop in that part of the surface where stresses are set up during flexing, or if that part of the surfaces initially contains a crack, cause this crack to extend in a direction perpendicular to the stress.

The “IKON” De-Mattia Flex Tester consists of a set of grips to hold the test specimens in two tiers with their holding faces lying in the same vertical plane. The flexing and unflexing action is provided by holding one end of the test specimens in a fixed grip and the other end in a reciprocating grip. The set of grips has two fixed grips and one large reciprocating grip positioned between them in order to flex half of the test specimens while the other half is being unflexed. The reciprocating grip is fitted with gun metal cushion which slide on hardened and ground rods made of high carbon steel. The reciprocating motion is provided by an eccentric and linkage mechanism driven by an electric motor through V-belt and pulleys. A six digit counter with reset is provided for indicating the number of test cycles undergone.

 

The equipment is build on a rigid cast iron base plate and finished in hammer tone painting and bright chrome plating to give it a corrosion resistant finish.

Molding dies for preparing test specimen, and jig and punch assembly for making initial crack in test specimens for crack growth test are available as optional accessories.

Technical Data:

Related Standard:

Product Details:

We are one of the prominent firms in offering a wide range of Digital Flammability Tester in the market. Our provided products are designed under the supervision of experts.

Features:

Long service life

Immaculate finish

Simple design

High efficiency

Sturdy construction

Smooth performance

Product Details:

Digital flammability tester used to determine flammability of the fabric by 45° angle method.

With fine gas control system to regulate the flame length.

Movable sample mounting mechanism to adjust the sample as per standards.

Digital control panel with resettable timer & transparent glass door to view sample on testing.

The equipment adheres to C.E specifications for safety.

Complete with all accessories including brushing device for raised fibre fabrics.

Supplied with Inspection & Calibration Certificates.

Supplied with Inspection & Calibration Certificates.

 
Dimension:

Length
Depth
Height
365 mm
180 mm
570 mm.
14 Inch
11 Inch
22.5 Inch

Related Standards: ASTM D 1230, FTMS 191-5908, CRF 16-1610, CALIF TB 117.

Product Details:

Type of construction                                   : Two columns supported load Frame.

Force rating                                                : 500 Kg

Crosshead Drive Mechanism                         :Screw and Nut mechanism driven by fixed geared motor                            Crosshead Speed Range                               : Fixed speed of 300 mm/min (or specify). 

Force Measuring Transducer                        : Load Cell.

Range                                                             : 0-500 Kg.

Resolution                                                      : 25 Grams approx.

Accuracy                                                        : +/- 0.5% of FSD.

Display                                                      : Back-lit Alphanumeric LCD Digital Display Unit for

                                                                     force in Kgs or N with Peak Force Memory.

 Travel                                                            : Maximum 300 mm approx.

Additional Information:

• Delivery Time: 4 WEAKS

Product Details:

We have marked a unique position in the domain by offering a wide gamut of CSP Lea Strength Tester to our respected customers. The offered testers are designed using innovative technology.

Features:

 

• Longer working life
• Fine finish
• Easy to use
• High performance
• Damage resistance
• Strong construction

 

 

Lea strength tester is used for determining the Tensile Strength and Elongation of Cotton, Wool, Jute and other textile materials in form of skein. The strength is determined in such a manner that the test specimen is gripped by two lea holders vertically arranged one below the other and continuously tensile stressed until it breaks. Elongation is also determined at the same time i.e. extension of the specimen held between the grips during the tensile test. The machine consists of a sturdy metal plate base with load measuring unit fixed at the top and the driving assembly fitted at the bottom. An electric motor transmits power to the lead screw through gear box. The pendulum rod is connected with the upper lea holder through main boss.

 

Lea strength tester comes in four different capacities viz. 100 LBS, 200 LBS, 300 LBS & 500 LBS. A suitable capacity of Lea Strength Tester may be selected prior to order. If the count is known and the strength is determined with the help of “IKON” Lea Strength Tester, by multiplying both the values i.e. COUNT x strength in LBS determines CSP (Count Strength Product).

 

Below mentioned would be required to carry out the test which are not included with Lea Strength Tester and can be procured separately.

 

• Wrap reel (Imperial System) For making Lea.
• Direct Yarn Count Balance for determining the Count.

Product Details:

• Perspiration tester to determine colorfastness to perspiration.
• Ergonomic latest design with modern aesthetics.
• Smooth precision engineered components for excellent performance.
• Supplied with 5Kg dead weights as per standards .
• Complete with all accessories –acrylic palates, adjacent fabrics etc.
• Supplied with calibration & inspection certificates
• Weight: 8.3 Kg. (18.25 lbs)

Dimension:

Length Depth Height:

• 225 mm 72 mm 182 mm.
• 9 inch 3 inch 7 inch

Related Standards:

• 105, BS 1006, IWSTM 6, 174,175, and DIN 54005, 54006, 54007, 54020 Standards.

Product Details:

The “ATC” Digital Light Fastness Tester is used for determining the Colour Fastness to Light using a 500 W Mercury Ballast Tungsten Filament Lamp and internally phosphor coated. Digital light fastness tester is suitable for all types of textile except photochromic coloured textiles.

 

Principle :

A test specimen together with blue wool standards is exposed to the light from a MBTL fading Lamp. The Colour Fastness of the specimen is assessed by comparing its fastness with that of 1 – 8 Blue Wool Standards.

 

Equipment :

Digital light fastness teser consists of a hollow cylinder of metal open at both ends with an internal diameter of 18” and length of 18”. A 500 W MBTL fading lamp is mounted centrally so that the light distribution is constant around the circumference. An hour meter with buzzer and hour to talizer are mounted on the base. Four specimen holders are installed at equidistance in inner circumference of cylinder along with metal sheet mask to cover half of each test specimen and the standards. As temperature may touch 800 C constant cooling arrangement with water flow is provided. A horizontal pump and water tank are included in scope of supply.

 

Testing Standards Required :

• 1 to 8 Blue Wool Light Fastness Standard
• Grey Scale of Change in Colour

 

Light Fastness Tester comprises of :

• MBTL Lamp : MBTL Lamp
• Specimen Holder : 4 Nos.
• Test Tube Holder for Humidity Control : 50 Nos.
• Water Tank : 1 No.
• Pump : 1 No.
• Hour Meter with Buzzer : 1 No.
• Voltage Stabilizer : 1 No.
• Potassium Carbonate : 500 gms. (1 Box)
• Grey Scale for Change in Colour : 1 No.
• Blue Wool Standards : 1 to 8.

 

Related Standards :

Australian Standard : AS 2001.4.2

Product Details:

Tearing strength tester to determine tearing strength of knitted and woven fabrics.

Capacity up to 6.400Kgs.

With adjustable cutting knife.

Having three variable capacity 1.600kg, 3.200kg & 6.400kg for different type of fabrics.

Latest design with modern sophisticated look.

Complete with accessories including three calibration weights.

Supplied with inspection & calibration certificates.

Weight: 28 kgs (61.6 lbs)

Dimension:

Length Depth Height: 520 mm 225 mm 560 mm.

20.5 Inch 10 Inch 22 Inch

Related Standards: BS 4253,ASTM D 1424-96,DIN 53862,and BSEN 13937 standards

Product Details:

Product Specification Product DescriptionDyeing is one of the most important processes to which the woven fabric is subjected to in processing. During dyeing operation a very specific conditions should be maintained in order to ensure the fixation of dye molecules to the fabric. It is most suited for fabric made out from natural fibre. Open Bath / Water Bath dyeing equipment is being used for sample dyeing of fabric and yarn by textile manufacturers. It is highly cost effective and provides quick results which are required for sample dyeing.

Features of Open Bath/Water Bath:

• Open Bath/Water Bath are fabricated out of 304 quality stainless steel.
• Beaker body and lid made of 316 quality stainless steel.
• Buzzer to indicate the completion of the process cycle or step.
• Equipped with controller in order to control Time v/s Temperature profile.

Specifications:

• Capacity Max.12 Beakers
• Capacity of Beaker 500 ml.
• Temperature Maximum operating Temperature 100º
• Maximum rate of heating 3.5ºC/Min.
• Electric Supply Single phase 220 Volts, AC Supply
• Heater Supply Through 3 Kw Immersion Heater
• Medium used for Heating Water
• Electrical Supply 1 Phase
• Overall dimensions of the Unit 24” (W) x 16” (D) x 12”mm (H)
• Net Weight of the Unit 27 Kgs. with 12 Beakers

Product Details:

One of the most common measures of the quality of a fabric is the number of threads per unit length in both the warp and weft directions. In this apparatus, a motorized traveling microscope is used for viewing the weave of the fabric under test. Openings of known widths are provided to enable picks and ends per unit length to be determined both in Metric and Imperial Systems.
The base of the apparatus is meticulously finished in Metallic Blue Paint and all other Parts are made of Stainless steel for trouble free life long operations.

Specification:

• Fabric Can be Checked: 1/4inch, 1/2 Inch, 1 Inch, 20 mm, 50mm (Calibrated Slots)
• Digital Counter: 4-Digit Re-settable Digital
• Counter (Registers each increment with a Beep) – 0-9999, L/C: 1
• Microscope Magnification: 40x (10x eyepiece and 4x Objective Lens)
• Light Intensity Control: Variable light intensity
• A fine equipment to check the read/pick of any type of fabric conveniently and accurately
• 40x magnification with in-built reference line
• Calibration Certificate

Product Details:

The FLAMMABILITY TESTer made of stainless steel shield of specified size. The shield is open at the top, it has transparent front sliding windows, and an opening of specified size is left at the bottom of the front to manipulation of the gas burner. A set of Bunsen burner of specified size attached at the bottom of the shield, the burner has an arrangement to slide.

 

            A clip is vertically held at the top of the instrument with the help of the rod, there is a set of the two –stenter pin plates, carrying pointer pins and attached to one side of its board surface, to prevent movement of the lower end of the test specimen during the application of the test flame. Each plate is secured at one to the side of the shield in the horizontal position.

 

            A set of specimen holder consisting of two U- shaped stainless steel plates between which the test specimen can be held in such a way that the fabric specimen is free at the bottom and is held at the top and sides so that the total exposed area is 50 x 305 mm the specimen holder will be positioned in the draught –free box vertically so that the ignition flame striker the centrally and 19 mm above the bottom edge of the specimen.

 

All parts of the instrument is bright chrome and bright buffing of stainless steel parts for corrosion resistance long life

 

Note: we will not supply any gas/gas cylinder.

 

TECHNICAL DATA

 

Size of the Test Chamber                                    : 300 x300 x 760mm

Size of the Gas Burner                                        : about 150 long x 9 mm internal diameter

Size of the test specimen                                    : 200 x 160 mm

Size of the flame                                                  : 38 mm

Burner to specimen bottom edge distance          : 19mm

Product Details:

Spray tester or water repellency tester used to measure the resistance of fabrics to wetting by water.•Latest economic design.•Specimen holder is fixed at 45° to meet the American standard.•Special funnel, which adheres to the standard.•Complete with all accessories including 500ml beaker, template & marking pen for cutting specimen. •Supplied with calibration & inspection certificates.•Weight: 4.6 Kg. (10.2 lbs)•Related Standards: AATCC 22 •Dimension: Length Depth Height 419 mm 305 mm  482 mm.16.5  inch      12  inch 19  inch

Additional Information:

• Delivery Time: 15 days

Product Details:

Product DescriptionOne of the most common measures of the quality of a fabric is the number of threads per unit length in both the warp and weft directions. In this apparatus, a motorized traveling microscope is used for viewing the weave of the fabric under test. Openings of known widths are provided to enable picks and ends per unit length to be determined both in Metric and Imperial Systems.
The base of the apparatus is meticulously finished in Metallic Blue Paint and all other Parts are made of Stainless steel for trouble free life long operations.

Specification:

• Fabric Can be Checked: 1/4inch, 1/2 Inch, 1 Inch, 20 mm, 50mm (Calibrated Slots)
• Digital Counter: 4-Digit Re-settable Digital
• Counter (Registers each increment with a Beep) – 0-9999, L/C: 1
• Microscope Magnification: 40x (10x eyepiece and 4x Objective Lens)
• Light Intensity Control: Variable light intensity
• A fine equipment to check the read/pick of any type of fabric conveniently and accurately
• 40x magnification with in-built reference line

Product Details:

• Drape meter to determine the draping/hanging phenomenon of fabrics.
• Ergonomic latest design with stylish appearance.
• 1000W halogen lamp used for exposure.
• With developing chamber
• Supplied with manual where calculation for drape co-efficient is given.
• Complete with all accessories –ammonia paper, template etc.
• Supplied with calibration & inspection certificates.
• Weight: 36.6 kg (80.52 lbs)

 

 

Dimension:

• Length	Depth	Height
  400 mm	460 mm	1010 mm.
  16 Inch	18 Inch	40 Inch

Related Standards:

• IS 8357-1977,BS 5058,DIN 54306,and ERT 9003, UNI 8279 standards.

Product Details:

Air Permeability Tester for textiles is used for air permeability testing of fabric. This system consists of an arrangement for holding the test specimens between two flat faces so as to expose a known area to the flow of air through it, a Vacuum System draw air through the exposed area of the test specimen.

Specification:

• 4cm 2 x 10 cm 2
• 0 – 60 LPH
• 0 – 900 LPH
• 600 – 6000 LPH
• With Branded Vacuum Pump
• Suitable for Filter Fabric & Non-Woven Fabric

Product Details:

Double Walled, Interior Made of SS. Exterior Made of Ms Finished By Powder Coating. The Portion B/W The Outer And Inner Wall Covered With Glass Wool. Glass Door and Out Side Metal Door With Magnetic Gasket And Lock .Two Removable Trays at Fixed Distance are Provided of SS. Units Consist Of Main Switch, Fuse, Pilot Lamps For All Controls. Digital Display Electronic Temp Controllers For Dry & Wet

Bulb. Humidity By Steam Injection Controlled By Dry & Wet Bulb, Principles And Set By Chart Provided. Forced Air Circulation For Uniform Temp In Case Of Cooling Models By Hermetically Sealed Compressor.

Product Details:

Product Details:

We have make a reputed position in the market by providing a high quality range of Fabric GSM Cutting Pads.

Features:

 

• Safe packaging
• Light weight
• Smooth cutting

Product Details:

Product Details:
Description:

• Specially designed instrument to detect broken needle or any ferrous particles in a garment.
• Latest model with modern aesthetics.
• Works on the magnetic induction principal.
• Can detect ferrous, non ferus particles.
• Product width up to 600mm can be easily checked in this machine.
• An alarm sounds at the detection of any broken needle the bel stops and comes back to its original position

Product Details:

Application

Wascator FOM 71 CLS Lab Washer-extractor. Standard reference washing machine. Microprocessor controlled, up to 999 washing and drying programmes can be designed as required, input via the keyboard and stored in memory. The unit is programmed as standard with BS, ISO, and IWS test programmes.
Automatic Soap Dispenser, for multiple washing.extracting cycles without intervention. Makeweights, stability templates and rules, reference detergents, bleaching agents and conditioners also available, see following specifications.
Marks and Spencer Test Programme. Pre-programmed before delivery only. For M&S accredited suppliers only.

Standards M&S P1, P1A, P3A, P12, P91, P99, P99A, P134

BS EN 25077/26330, ISO 5077/6330, IEC 456

Power 220 / 110 V 50/60 Hz

Weight 200 Kg

Dimensions 760 x 780 x 1600 mm(LxWxH)

Additional Information: