Paper Testing Instruments

Product Details:

TENSILE STRENGTH TESTER (ELECTRONIC)

Electronic Tensile Tester (Vertical Model) with Digital Display of Tensile Strength & Stretch of paper, paperboard and similar materials.

Complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. A dual screw unit testing frame to accommodate large size test piece with wide load ranges.

Standard model range : 0- 500 N. (50 KGF)

Available in other load range from 1000 N (100 KGF), 2500 N (250KGF)
Also available in higher Load Capacity.

Product Details:

The instruments is designed for evaluating stiffness and resilient qualities of paper, plastics, cardboard, light metallic sheets, foil and other flexible material having comparatively strong bending resistance. The 38 mm wide specimen clamped between a vice on a balanced pendulum supported by antifriction bearing and lower end clamp on a rotating disc then Specimen is bent by 15 degree at a constant speed and when it becomes 50 mm in load length, bending moment required to bent specimen is measured in gcm unit and the stiffness of the material is determined rotation are clockwise and counter clockwise, so that stiffness can be measured in both the directions.

 

Measuring range: 0-5000 Stiffness Units Extra Option: Triple shear cutter for sampl preparation.

 

Dimensions : 10” x 11” x 16”

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This equipment is designed to measure the crushing strength of paper core, paper tubes, bobbins. The maximum pressure that applied on the surface of the carrier, at that time carrier will collapse. The detected sharp collasing point is crushing strength of specimen is being displayed directly on a digital indicator.

Product Details:

Simple paper strip cutter with the Provision to cut the strip sample for tensile test cutting width 15 mm X 300 mm.

Dimensions : 22” x 12” x 5
(15 X 300 mm & 25 x 300 mm)

Additional Information:

• Item Code: IK-SC-01
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1 WEEK

Product Details:

The compressive index of a material the failure load per width/basis weight) increase with sheet density in much the same way as the tensile index. Hence fibre characteristics that contribute to density and flexural modulus of the sheet and the resilience of the fibres themselves are likely contributing factors.

 

Fully microprocessor controlled menu driven software allows easy selection and setting of test parameters with precise pneumatic clamping hold the specimen accurately and sample test to minimize the human error during test to provide rapid and efficientdetermination of compression strength of fluting media or test linersuitable for paper and paperboard GSM range 100-400 with in-built printer.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Ikon - Crush Tester is used for the ring crush(RCT) for paper with thickness between 0.15 and 1mm, edge crush(ECT), plybond adhesion (PAT) and flat crush(FCT) test for board. It can also be used for the compression test (CMT) for tube with diameter less than 60mm.

Features:

• Four test modes of RCT, ECT, FCT and PAT available
• Microcomputer control, auto measuring and intelligent test result judgment, auto returning.
• Real time display of curve, data auto collecting, calculating,analysis, storage and printing.
• LCD display, PVC operation manual
• Synchronous motor drive for precise pressure output.

Technical data:

• Accuracy: ≤±1%
• Platen parallelism: ≤0.05mm
• Compression speed: 12.5±1mm/min

Product Details:

This instrument is used for testing the average Smoothness, Porosity and Softness of paper and films by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure.

Electronic self starting timer for automatic measuring of air to pass through the test specimen. The timer starts automatically when the zero slit of the graduated ruler pass an optional read fork and stops automatically as soon as the predetermined volume of air has been passed through the sample.

Extra Option: Electronic self starting timer as an optional accessory, for automatic measuring of air to pass through the test specimen. The timer starts automatically when the zero slit of the graduated ruler pass an optional read fork and stops automatically as soon as the predetermined volume of air has been passed through the sample.

Additional Information:

• Item Code: IK-SPT-01
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1 Month
• Delivery Time: 4 weeks
• Packaging Details: As per Specifications

Product Details:

Designed for determining the Internal Bonding Strength of Paper, Paperboard and Laminates, by measuring the average energy, in thousands of foot pound required to delaminate the specimen in two piles, as described reference standard TAPPI T-569.

Dual capacity pendulum of 0.25 FT/LB and 0.1-0.5 FT/LB. Readings directly on calibrated scale. The five number specimen preparation unit, which will allow for variations of specimen thicknesses, with different clamping pressures on the specimen from 50 to 200 PSI.

Features :

• Standard calibration sliding weight with sample holder.
• Double side adhesive tape width 1”.

Product Details:

This instrument is used for determining the water absorbency of paper, paperboard and similar material. The water absorbency of paper (the cobb value) is defined as the quantity of water absorbed in a given time by one side of a unit area of paper or board placed horizontally under a head of one centimeter of water. Automatic Spring loaded sample clamping.

 

Dimensions : 12” x 10” x 10”

Product Details:

It is used for measuring the basis weight GSM of paper and other sheet materials by weighing a small test sample with given dimensions. The GSM readings of the specimen display directly on screen.

Suitable for different size of paper 10 x10, 10 x 20, 20 x25, 25x25, 25 x 40 cm.

Auto zero adjustment with printer port & RS 232C.

Measuring range : Maximum 0-1500 GSM with template size 10x10

 

Accuracy : 0.1 GSMh

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Product DescriptionBox compression strength tester is used to measure the containers resistance to the external compression loads during transit and storage period, this is suitable to test stacking strength of corrugated boxes and other type of contaiers.

Suitable to test following standards:

• IS :7028 (PART VI)1973
      : 7028 (PART IX)1975
• ASTM D4577-94/ D 642-98
• FCBM 14:96
• TAPPI :T804 om-02
• FEFCO:TM 50 1997

Capacity available:

• 1000 kgf,2000 kgf and 5000kgf
• Features of digital model
• Direct lcd digital display readout of compression strength in kgf and deflection in mm
• Sophisticated electronic micro controller system for easy operation and precision
• Fully automatic single start test button
• Electro-mechanical drive system testing speed 10±3mm per minute
• Load display least count 0.1 kgf and deflection least count of 0.1mm
• Test result peak-hold facility
• Auto tare set function
• Printer port to generate test report and graph
• Provision of test mode- pre-load, pre-length and instant mode

Additional Information:

• Delivery Time: 4 Weeks

Product Details:

To determine the compression resistance of corrugated & non-corrugated boxes. The instrument provide the Digital Display of Load and deformation. Complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. Platten Size 600 x 600 mm / 1000 x 1000 mm Load capacity 0-1000, 0-2000 Kgs.

 

Option: Special dedicated window based software for interfacing main unit with computer and printer. Computer based control, data collection and data analysis for graphical result of load and deformation arithmetic mean, max, mininum, standard coefficient of variation (CV), maximum / minimum of series, peak value, selection of unit either Kgf. Or kN and graphical presentation of test series and real time graph.

 

Dimensions: 58” x 45” x 76”

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)